Maytag fridges are built to keep food fresh and energy use low, but when temperatures rise or leaks appear, things can go bad fast.

Fridge or Freezer Not Cooling

– This could be due to a failed compressor, faulty fan, or defrost system malfunction. We restore proper airflow and cooling.

Leaking Water or Ice Maker Not Working

– Water pooling around or inside your fridge often comes from a blocked defrost drain or cracked inlet valve. We clear and reseal leaks fast.

Loud or Unusual Noises

– Buzzing, clicking, or grinding sounds typically point to evaporator or condenser fan issues. We diagnose noise sources and quiet things down.

Maytag washers are known for durable construction and simple, effective cycles, but when yours stops draining, leaks mid load, or refuses to spin, it is time to call in a pro.

Washer Will Not Spin or Complete the Cycle
– This is often due to a broken lid switch, clogged drain pump, or a worn motor coupling. We identify the issue and restore smooth operation fast.

Shaking, Noise, or Off Balance Loads
– Excessive vibration or knocking sounds may mean the suspension rods or bearings are worn out. We replace key parts and level the unit for stable performance.

Leaking or Overflowing During a Cycle
– Worn door gaskets, cracked hoses, or malfunctioning inlet valves can cause water to leak. We inspect the full water system and repair it right.

Maytag dishwashers are solid and simple, but can still develop issues with draining, drying, or washing performance. That is where we step in.

Dishes Not Getting Clean or Still Wet
– If your dishes come out dirty or damp, the issue may lie with a blocked spray arm, bad water inlet valve, or failed heating element.

Leaking Under the Door or Around the Base
– Worn door gaskets, loose fittings, or cracked internal tubing can cause leaks. We identify the exact source and seal it up.

Water Not Draining After a Cycle
– We check for pump failures, clogged filters, or float switch problems and restore complete drainage.

Maytag over the range microwaves are tough and convenient, but when they stop heating or throw sparks, they become a hazard. We safely repair them on site.

Microwave Not Heating Food
– This usually means a failed magnetron, capacitor, or diode. We test and replace high voltage components safely and quickly.

Sparking or Arcing Inside
– This can be caused by metal fragments, a damaged waveguide, or residue on the walls. We inspect and clean thoroughly, then replace any failing parts.